SSCOR VX-2^® with Charging/Retention Bracket

Features & Specifications

FEATURES:

Compliant with SAE J3043 standards*
When the device is on the charging/retention bracket the device runs using the vehicle battery and uses the vehicle battery to charge the internal sealed lead acid battery
The device can be removed from the charging /retention bracket with one hand.
Fully adjustable regulator and gauge. Achieves negative pressure ratings to any point between <50mmHg to >525mmHg to perform a full range of suction procedures
Well protected yet easily accessible suction canister
Outward facing controls allow the operator to easily operate the device while it is on the charging/retention bracket.
IPX4 rated for resistance to ingress of fluids
Internal battery care system with external indicators
Ramps up incoming voltage to optimally charge the battery
Provides a float charge when the battery is fully charged to avoid over-charging
Disconnects a depleted battery to avoid destructive deep discharge
LED indicators on the front panel show battery condition
Sealed Lead Acid Battery makes replacing the battery affordable. SSCOR will replace the battery free of charge if the battery does not perform to specifications within three years of purchase (SSCOR VX-2 with Charging/Retention Bracket only)
The SSCOR VX-2 with Charging/Retention Bracket series is not recommended for hospital use

NOTE: If you purchase a SSCOR VX-2 without the charging/retention bracket you cannot retrofit the device to accommodate the bracket at a later date.

SPECIFICATIONS:

Performance	Clinical Airflow Rating > 30lpm Variable Regulator and Gauge provides negative pressure readings between <50mmHg to >525mmHg
Battery Run Time:	45 minutes (+/- 10%) when fully charged at full capacity
Battery Condition Indicators	LED indicators show battery level of charge
Internal Battery Charger	Charges the battery from AC or DC power source. Charges the internal sealed lead acid battery and disconnects a depleted battery to avoid a deep discharge. LED's indicate charging status and remaining run time on internal battery.
Charging/Retention Bracket	Secures the device to a force of 25G, EN 1789 compliant and SAE J3043 compliant.*
Dimensions	17” L x 9” H x 5.25” W 43.2cm L x 22.9cm H x 13.3cm W
Weight	9.2 lbs /4.17 kg (device with bracket) 8.6 lbs /3.9 kg (device only)
Ingress Protection	IP34

STANDARD ITEMS INCLUDED WITH PRODUCT:

Charging/Retention Bracket, canister, 2m patient tube, SSCOR SDC Catheter^™ (Formerly the SSCOR DuCanto Catheter®) and Quickstart Guide.

CONFORMS TO:

ETL listed and conforms to ISO 10079-1, UL 60601-1, EN 60601-1-2, CSA C22.2 No. 601.1 - M90, IEC 60529, SAE J3043, EN 1789.

REFERENCE / MODEL NUMBER:

2310BV

from-the-sscor-blog-4

Blog: How to Hyperoxygenate Before Suctioning

"Hypoxia is one of the most common suctioning complications. It’s also preventable in most scenarios. Hyperoxygenate a patient prior to suctioning to reduce the risk of hypoxia as well as other suctioning complications. Here’s what you need to know about the process. "

POSTED BY SAM D. SAY - AUG 24, 2022